200-240 +5%/-10%,
50/60Hz +/-5%

-

200-240V +/-10%,
50/60Hz +/-5%
100-115V +/-10%,
50/60Hz +/-5%

-

200-240V +10%/-10%,
50/60Hz +/-5%

200-240V +/-10%,
50/60Hz

200-240V +/-10%,
50/60Hz +/-5%

200-240V +/-10%,
50/60Hz

380-460 +/-10%,
50/60Hz +/-5%

380-480 +/-10%,
50/60Hz

380-480 +/-10%,
50/60Hz +/-5%

380-480 +/-10%,
50/60Hz

0.2-7.5kW

0.4-55kW (75 to 150kW (available soon))

0.2-7.5kW

11-55kW (75 to 132kW (available soon))

0.5-360Hz

0.1-400Hz

0.5-360Hz

0.1-400Hz

200% or greater
(3.7kW and above: 180% or greater)

200% or greater (at 0.5Hz)
150% at around 0Hz

Around 100%
(Torque boost mode)

100% or greater
(Torque boost mode)

6-60Hz (1:10)

Up to 3.7kW: 6-60Hz (1:10)
5.5kW and above: 20-20Hz

-

-

20-100%

10-20%

20-100%

-

Performs under min. frequency;
under set frequency

Performs at start; under set frequency at deceleration, or viaan external input

Performs under min. frequency;
under set frequency

Performs at start; under set frequency at deceleration, or viaan external input

150%, 60sec.

150%, 60 sec., 200%, 0.5 sec.

150%, 60sec.

120%, 30 sec., 150% 0.5 sec.

0.1-3,000sec.

0.01-3,600sec.

0.1-3,000sec.

0.01-3,600sec.

Max. 16-stage

Max. 16-stage (bit command also available)

Max. 16-stage

Max. 16-stage (bit command also available)

0-10VDC, 4-20mA

0-10Vdc, 4-20mA -10 to +10VDC,

0-10VDC, 4-20mA

0-10Vdc, 4-20mA -10 to +10VDC,

Over-current protection, overvoltage protection, undervoltage protection, overload protection, temperature error CPU error, EEPROM error, ground fault External trip PTC error, USP error, input overvoltage protection, CT error

Over-current protection, overload protection, braking resistor overload protection, over-voltage protection, EEPROM error, undervoltage error, CT error, CPU error, external trip, USP error, ground fault, input overvoltage protection, instantaneous power failure, option 1, 2 connection error, inverter thermal trip, phase failure detection, IGBT error, thermistor error

Over-current protection, overvoltage protection, undervoltage protection, overload protection, temperature error CPU error, EEPROM error, ground fault External trip input overvoltage protection, USP error, PTC error

Over-current protection, overload protection, braking resistor overload protection, over-voltage protection, EEPROM error, under-voltage error, CT error, CPU error, external trip, USP error, ground fault, input over-voltage protection, instantaneous power failure, option 1, 2 connection error, inverter thermal trip, phase failure detection, lGBT error, thermistor error

AVIR function, curved acceleration/deceleration, frequency upper and lower limit, fine adjustment of start frequency, carrier frequency change, frequency jump, gain and bias setting, jogging, electronic thermal level adjustment, retry, trip history, 2nd motor constants setting, auto-tuning, fan on/off selection

V/f free-setting (up to 5 points), frequency upper/lower limit, frequency jump, accelIdecel. curve selection, manual torque boost value and frequency adjustment, analog meter tuning, start frequency setting, carrier frequency setting, electronic thermal free-setting output frequency start/end setting, output frequency start/end ratio setting, analog input selection, retry after trip, restart after trip, retry after instantaneous power failure, various signal outputs, reduced voltage soft start, overload restriction, default value setting, deceleration and stop after power failure, AVR function, fuzzy accel./decel.,auto-tuning(on-line/oftline),high-torque multi-motor operation

AVR function, frequency upper/lower limit, PID control, carrier frequency change, frequency jump, electronic thermal level adjustment, fine adjustment of start frequency, gain/bias setting, retry, automatic torque boost, trip history

V/f free-setting (up to 5 points), frequency upper/lower limit, frequency jump, accel./decel. curve selection, manual torque boost value and frequency adjustment, analog meter tuning, starting frequency setting, carrier frequency setting, electronic thermal free-setting output frequency start/end setting, output frequency start/end ratio setting, analog input selection, retry after trip, reduced voltage soft start, overload restriction, automatic energy-saving

-10 to 50 degrees C

-10 to 50 degrees C

-10 to 50 degrees C

-10 to 50 degrees C*

20 to 90%RH(no condensation)

25 to 90%RH(no condensation)

20 to 90%RH(no condensation)

25 to 90%RH(no condensation)

Less than 1,000m of altitude, indoors (no corrosive gas not dust)

Less than 1,000m of altitude, indoors (no corrosive gas not dust)

Less than 1,000m of altitude, indoors (no corrosive gas not dust)

Less than 1,000m of altitude, indoors (no corrosive gas not dust)